Double Header
One of the new functions in DigiTrains 1.9 is a native double header support which is currently uniqe among the apps for model railroading.
Double Header means the two locomotives are connected to a train. This can be only achived in model railroading if you have a command station which supports it (for example Lenz) or you set both locomotives to the same dcc address.
DigiTrains provides a checkbox in Double Header menu where you can enable or disable the native double header operation.
If you command station do not support double header, and you enable native operation, DigiTrains will send speed commands for both locomotives matched together in Double Header menu, no matter which one we control from Train control menu. The direction and functions can be still adjusted individually. This way you can connect one train to the other on the layout moving them separately, then just put a tick to enable double header and then move them in syncron. Of course the parameters of the locomotives should be set before to match the speeds at similar speedsteps.
So from now you can even use the function even if you use Roco 10764 + MultiMuas or Z21 as command station.
How to use Double Header in DigiTrains:
1. Select a loco in train library
2. Enter into Train settings menu (tools icon next to loco thumbnail)
3. Select Double Header menu
4. Set if you command station supports double header or not
5. Select which train to match to the current one
6. Go back to train control menu and set speed. Both locomotive will move.
To disable double header repeat steps 1-4. Touch the locomotive in the list which has a tick on its picture. That is the actually matched locomotive to the double header. This will disable double header.
